BMS Stage 1 BMW Performance Tuner

Home / Business / BMS Stage 1 BMW Performance Tuner

October 20, 2022 Elizabeth Samson 0 Comments 0 tags

Table of Contents

The stage 1 BMW tuner fastens to the two sensors in the engine area. Factory Dimethyl Ether tuning enhances your boost, fueling, and timing for high performance and reduces turbo lag. It has a 64mhz processor that can sample sensors eight hundred times in a second. This is done by using a 10-bit dedicated digital-to-analogue converter, producing a powerful yet smooth performance.

What Is BMS Stage 1 BMW Tuning?

While tuning your BMW depends on what you need from your car, the ultimate goal is to enhance performance. The main point of modifying your car is to get more horsepower and better fuel efficiency. The BMS stage 1 BMW performance turner is a quick plug to use. It can automatically detect your motor using the TMAP sensor voltage amount and adjust the tuning to suit it.

For instance, the power gains on the N20 engine are up to 45 horsepower and 60 torque. This is equivalent to 35hp and 50tq at the wheels. Installing it is fairly quick and easy, and you can uninstall it just as seamlessly. It goes well with every other driving mode, including alterations in fuel economy.

The stage 1 tune up is specifically designed to safely increase and enhance the engine’s performance without hardware modifications.

Installing the Berger Motorsports Stage 1 Tuner

Installing a BM Stage 1 tuner is a simple process. You can install it by yourself if you have the right equipment, or any BMW tune up shop will be happy to help you with the upgrade. To safely install the tune up in your all-weather box, follow these steps:

Disconnect the negative terminal at the trunk.
Remove the plastic cover on the passenger side, as well as the engine cover.
Run the harness through the gap and weep the box. Locate the TMAP sensor.
Remove the clips using a flathead screwdriver.
Reconnect the sensor plugs.
Reinstall your covers, then zip-tie the box if you’d like it extra secure.
Reconnect your negative battery terminal.
Turn your car on. If you don’t see any check engine light or error messages, it means you installed it correctly.

After installing the tuner, the car should not feel any different. It may take eighty to a hundred miles of driving before the ECU adapts to the upgrade. You will notice a significant power difference at that point, especially in the mid-range torque. According to Berger Motorsports, the m55 motor should gain about 50 horsepower and 65 torque.

Features of the BMS Stage 1 Tuner

On a factory vehicle, the power gains are usually up to 40wph and 50wtq.
It is quick and easy to install. Simply plug it in, or unplug it if you’d like to remove and replace it with another upgrade.
It makes your BMW run very smoothly, the way it would have if it were new from the factory.
It is designed to work well with every driving mode, from daily roadways to competitive raceways.
During everyday driving, it does not change the fuel economy. You can adjust the settings as you prefer.
It is manufactured in the USA, so suppliers and installers can easily be contacted as direct experts on installation.
It is not locked and can be unplugged and removed for resale without a trace.
It has an extended warranty. If you have any problems with the tuner, you’ll be able to get a refund.
The tuner has a K&N drop-in filter. It’s washable, reusable, and intended to last throughout the duration of your vehicle’s life.
It comes with BC racing coil covers with swift springs, reducing unsprung weight to increase performance.
It has a resonator and a muffler delete to increase the sound of your car, giving you that satisfying, signature BMW rev.

What Is the Best BMW Tuner?

Tuners are the most accessible modifications to perform on a BMW to improve performance and customize your vehicle’s usability. The most common tunes are the piggyback and flash tunes. Both serve the same purpose and increase power similarly, with a few variations. A piggyback tuning controls the boosts and allows the factory ECU to make adjustments when necessary, while a flash tuning rewrites the factory ECU.

If you’re interested in enhancing the performance of your BMW, the BMS Stage 1 tuner is a great place to start. Many BMW enthusiasts start with this popular tune up. When looking for a BMS stage 1 BMW tuner, find a good BMW dealer and have them take you through the process of tuning your car. Ensure you get genuine parts. Tune your BMW today to enjoy the benefits of enhancement.