Join the rest of the HP Printer users who are tired of finding and inputting their WPS Pin every time they want to print a document. Not only is it time-consuming, but it can also be complicated as you may accidentally enter your wrong pin number. This article will show you how to Find WPS Pin on HP Printer so that you’ll never have to worry about getting lost again!
What is a WPS Pin?
A WPS pin is a security feature on certain HP printers that allow you to connect to the printer over Wi-Fi and add or remove print jobs. To find your WPS pin, go to your printer’s settings and select “Wi-Fi Connection.” Under “Connection Type,” you’ll see a list of options, including “WPS Connect.” If you don’t see a WPS pin listed, your printer doesn’t have this feature.
To add a new print job using the WPS pin, go to your printer’s settings and select “Add Print Job.” Under “Print Job Type,” select “Wi-Fi Connection” and under “Connection Type,” select “WPS Connect.” Enter the WPS pin number and click OK. To remove a print job using the WPS pin, go to your printer’s settings and select “Remove Print Job.” Under “Print Job Type,” select “Wi-Fi Connection” and under “Connection Type,” select “WPS Connect.” Enter the WPS pin number and click OK.
How to Find a WPS Pin
Finding the WPs Pin on HP Printer is easy if you know where to look. The easiest way to find the pin is to open the printer’s control panel and locate the network connection icon. Once you have located the network connection icon, click on it and then select the Wi-Fi tab. Next, under the Network Settings heading, you will see a list of available networks and their associated WPS pins. Simply select your network from this list and then click on the WPS button to Enable WPS. You can now use the provided pin to connect to your HP printer wirelessly. If you need to remove a WPS pin, simply repeat these steps but delete the network you previously selected.
How to Add and Remove a WPS Pin
If you’re wondering how to add or remove a WPS pin on your HP printer, this article can help. First, open the cover of your printer and locate the WPS button. This button is usually near the front left corner of your printer. Once you find the button, press and hold it down until a light starts blinking. Now release the button and locate the WPS pin located in the lower right corner of your printer. Using a pin-pushing tool (like a paper clip), push the pin into the hole next to the WPS button. Finally, use a small screwdriver to remove the pin. If you ever need to reset your WPS pin, simply insert it back into its hole and press down until it pops out.
Conclusion
If you’re like most people, you probably have a lot of printers in your home office. And if you’ve got a HP printer. Odds are good that you use the Wireless Protected Setup (WPS) feature to add and remove printers from your network. However, if you ever need to remove a printer that’s been added using WPS—for whatever reason—you’ll likely find it difficult to do so. In this article, we’ll show you how to find and add a printer using WPS. As well as how to remove it once it’s been added. So whether you’re looking for help setting up or troubleshooting your HP printer, be sure to check out this article!
